Over time, kitchen cabinets collect a sticky buildup from cooking, grease and dirty fingers. The steam from washing dishes and boiling can also create a film on cabinets as well as stains from grease, food and grime. Use Rejuvenate Multi Surface Cleaner to degrease and thoroughly clean and prepare your cabinets before you restore them with Rejuvenate Cabinet & Furniture Restorer.

To ensure superior results when using Rejuvenate, follow these simple clean and prep guidelines

First, dust all surfaces. A microfiber towel works very well for this

Remove all knobs and handles and clean them separately. Depending on the material and finish, use Multi Surface Cleaner or soak them in warm soapy water

Since cabinets are not usually scrubbed deeply when performing routine cleaning, it is recommended to give them a very thorough cleaning and completely degrease them before applying Rejuvenate Restorer

Apply a generous amount of Multi Surface Cleaner and allow it to sit for a few moments to break up any greasy residue

Wipe the surface with a clean microfiber towel or mitt. Repeat as needed, and scrub thoroughly to remove all of the dirt, wax and grease buildup

Allow to dry completely and check for residue

Repeat as needed

Do's & Don'ts

DO wear household gloves, protective eye wear and old clothes to protect yourself
DO make sure you remove all wax and residue before applying Rejuvenate Restorer
DO repeat cleaning as needed until cabinets are clean and residue free

DO repair any scratches, gouges or damage before you Restore them

DO NOT use scouring powder or other abrasives that can scratch the surface

DO NOT apply Rejuvenate Restorer until Cabinets are completely clean

DO NOT leave any residue from grease, wax, oil or other products on the surface

DO NOT use steam, heat or excessive moisture to clean wood

IMPORTANT: Be certain to REMOVE ALL GREASE, OIL, WAX AND RESIDUE. If your cabinets aren't clean and residue free, Rejuvenate Restorer cannot bond correctly

Next Step - Repair it! >