Rejuvenate Brand Home Restoration Products

Follow Us

Find Rejuvenate^®

Let Us Reward You For
Spreading the Word!

Receive a 20% OFF
COUPON CODE to be
applied to any of our
Rejuvenate® products
online just by
spreading the word!

All you need to do is
refer three friends and
they too will receive
an amazing discount!

CLICK HERE TO REDEEM
20% OFF NOW!

Quick Reference Links

translate this site

CABINETS & FURNITURE - Applying Restorer

For best results when applying Rejuvenate Restorer...

Rejuvenate Cabinet & Furniture Restorer restores life to finished wood, Formica, and laminate surfaces of a wide variety of cabinets, furniture and wall paneling. Its polymer-based formula fills in scratches, restores shine and protects cabinets and furniture from new scratches and water damage. An ultra-violet (UV) ray barrier shields surfaces from the sun’s damaging effects. One easy wipe-on application lasts up to three months

To ensure superior results when using Rejuvenate Restorer, follow these simple application guidelines

Clean and prep the surface with Rejuvenate Multi Surface Cleaner first

Test on an inconspicuous area before use

Use a new Microfiber Applicator Mitt

Pour liberally onto the Microfiber Applicator Mitt

Wipe on surface with overlapping strokes going in the same direction

On vertical surfaces, start from the top and work towards bottom

For Formica and other laminates, use a circular overlapping motion

Do not re-work the same surface area multiple times

Apply to one area at a time, then move onto the next area

Allow 20 - 30 minutes to dry

Apply additional coats to increase the shine

We recommend applying at least two coats for a wonderful satin type finish

If you prefer even more shine, apply a 3rd or even a 4th coat

If streaking occurs, apply an additional coat perpendicular to streaks

Do's & Don'ts

DO clean & prep surface thoroughly before restoring
DO apply one coat at a time
DO apply from top to bottom on vertical surfaces
DO apply in strokes that go with the grain for wood
DO wash the mitt applicator directly after use

DO NOT set open bottle on any unprotected surface as it may leave a ring

DO NOT shake product before application
DO NOT rework the same surface area multiple times while wet
DO NOT clean with any other brand products than Rejuvenate brand

DO NOT use steam or any other heated appliance on Rejuvenated surfaces

DO NOT apply a second coat of Rejuvenate until first coat dries COMPLETELY

IMPORTANT: Be certain to thoroughly clean and prep before you apply Restorer. REMOVING ALL OIL, WAX AND RESIDUE before you apply Rejuvenate Restorer is the key to superior results. If your surfaces aren't clean and residue free, Rejuvenate Restorer cannot bond correctly.