Rejuvenate Floor Restorer adds a deep shine and luster while sealing your floor against moisture and damage. Great for wood, tile, laminate, marble or any hard flooring surface.

To ensure superior results when using Rejuvenate Floor Restorer, follow these simple application guidelines

Clean and prep the floor with Rejuvenate Cleaner first

Test on an inconspicuous area before use

Use a new microfiber mop bonnet

Pour onto floor in an "S" shaped pattern

Apply to one small area at a time - approx 4 foot x 4 foot

Use mop to spread evenly in strokes that go in the same direction

Apply with the grain for wood floors

Slightly overlap the strokes at the edges for total coverage

Do not re-work the same surface area multiple times while wet

Apply to one area, then move onto the next area

Allow 45 minutes to 1 hour to dry

You can apply a second coat for a richer deeper shine as needed

Floor must be COMPLETELY dry before applying a second coat

Do's & Don'ts

DO clean & prep floor thoroughly before restoring.
DO apply one coat at a time.
DO apply in the same direction.
DO apply in strokes that go with the grain (for wood floors).
DO wash the bonnet directly after use.
DO maintain your floor's finish with Rejuvenate Shine Refresher.
DO set furniture on floor, DON'T drag it.

DO NOT set open bottle on any unprotected surface as it may leave a ring.

DO NOT shake product before application.
DO NOT rework the same surface area multiple times while wet.
DO NOT clean with any other brand products than Rejuvenate brand.

DO NOT use a steam vac or any other heated appliance on Rejuvenated surfaces.

DO NOT apply a second coat of Rejuvenate until first coat dries COMPLETELY.

IMPORTANT: Be certain to thoroughly clean and prep your floor before you apply Restorer. REMOVING ALL OIL, WAX AND RESIDUE before you apply Rejuvenate Restorer is the key to superior results. If your floors aren't clean and residue free, Rejuvenate Restorer cannot bond correctly to the surface.

Next Step - Maintain it! >